Key Highlights

1. The ER14250 is a 3.6V Lithium Thionyl Chloride (Li-SOCl2) battery known for its good energy density and long shelf life.
2. This battery has a stable operating voltage. It is a great choice for devices that need steady power.
3. With its cylindrical shape and small size, it fits well in spaces without much room.
4. Its long shelf life makes it good for devices that are used less often or for backup power.
5. The ER14250 works well in extreme temperatures. That makes it suitable for tough environments.

Introduction

In today’s world of advanced electronics, we need reliable and efficient power sources. Lithium batteries are a standout option. They power many devices, from advanced medical equipment to trendy consumer gadgets. This guide will explore the ER14250 battery. It is a popular choice, with a nominal voltage of 3.6V and great performance.

Understanding the ER14250 Battery

The ER14250 battery belongs to the Lithium Thionyl Chloride (Li-SOCl2) group. These batteries are well-known for several reasons. They provide a lot of energy. They also last a long time and can operate in different temperature ranges. But what makes them unique? How do they compare to other types of batteries?

The ER14250 battery has several important traits that make it special for many different uses. It is great for industrial tools, security systems, medical devices, and other areas.

Defining the ER14250 Battery and Its Unique Features

The ER14250 battery is a one-time-use battery. It is not rechargeable. This battery is made with lithium for the anode and thionyl chloride for the cathode. This special mix gives it a high and stable operating voltage of 3.6 volts.

The ER14250 has a typical capacity of around 1200 mAh, which means it can provide 1200 milliamperes of current for one hour. However, this capacity can vary slightly due to factors like the discharge rate and the temperature range.

The ER14250 is special because it has a long shelf life and can work in many different temperature ranges. These features make it a good power source for devices that must be reliable and last long.

The Science Behind Primary Lithium Batteries

To know the benefits of the ER14250, we should look at primary lithium batteries. These batteries are not like rechargeable ones. They create electricity through a one-way chemical process. When the materials inside are gone, the battery stops working. At that point, it has to be replaced.

A reaction occurs for lithium thionyl chloride batteries, such as the ER14250. In this reaction, lithium reacts with thionyl chloride, producing lithium chloride, sulfur dioxide, and electrons. The electrons then generate an electric current that moves through the circuit.

This type of battery provides high voltage, even in cold weather. It also has a stable discharge curve. Because of these qualities, it is perfect for situations where steady power is needed for a long time.

Detailed Specifications of the ER14250 Battery

Beyond its basic features, the ER14250 battery has important details that users should know. These specs are important for understanding how well this battery works in different situations. With this information, users can better understand the battery’s performance in various conditions.

Let’s take a closer look at the ER14250 battery. We will discuss its voltage, how much energy it can hold, its size, the temperature limits, and how long it can stay unused on the shelf.

Voltage, Capacity, and Physical Dimensions

The ER14250 battery has a regular voltage of 3.6 volts. This voltage is useful for devices that need a strong and stable power source. It can hold and provide an electrical charge of 1200 mAh.

1. The ER14250 battery is small.
2. It has a round shape.
3. Here are its sizes:
4. Diameter: 14.0 mm (around 0.55 inches)
5. Height: 25.0 mm (around 0.98 inches)

These sizes are important. They help the battery fit properly in the space of a device.

Temperature Ranges and Shelf Life

One great feature of the ER14250 battery is its wide temperature range. It can work well in both very hot and very cold conditions.

The ER14250 has a long shelf life because it has a low self-discharge rate. This feature makes it perfect for uses where the battery may not be used for long, such as in backup power supplies or safety devices. When stored correctly, an ER14250 battery can keep much of its charge for up to 10 years.

Comparing ER14250 with ER14250M

Both batteries are alike, but they have one main difference: their terminals. The basic ER14250 battery has a button-top terminal. This design is used in many places. The ER14250M, however, has a pin terminal. This type is made for mounting on a PCB (Printed Circuit Board). It is useful when selling the battery directly to a circuit board.

Choosing the right battery, ER14250 or ER14250M depends on your device’s needs. You also need to think about how the battery fits. If you are unsure about the type of terminal you need, check your device’s manual. You can also contact the manufacturer for assistance.

Pros and Cons of ER14250 and ER14250M

The ER14250 and ER14250M batteries use lithium thionyl chloride. They come with several benefits. First, they have a high energy density. This means they can store a lot of power in a small space. So, they are great for small devices. Second, they offer a long shelf life, lasting over ten years. This makes them good for devices that are not used often or need power that lasts a long time. They can also work in a wide temperature range, from -60°C to +85°C (-76°F to +185°F). This allows them to perform well in different conditions.

But, there are some problems with these batteries. They can’t be recharged. This means you will have to replace them when they run out. Also, their chemicals need special care. They have lithium and thionyl chloride, so you must throw them away correctly. Always be careful when disposing of these batteries.

How to Choose Between ER14505 and ER14505M Batteries?

Choosing between an ER14250 and an ER14250M battery depends on your terminal needs. If you need a battery for everyday use or a device that uses a regular battery holder, pick the ER14250. It has button-top terminals, which makes it work well.

Get the if your device needs a battery sold directly onto a PCB, get the ER14250M. This model has pin terminals and offers a solid electrical connection, ideal for those types of applications.

Conclusion

To sum up, knowing about the ER14250 battery is important to use it well. This battery has special features and details that make it a good power source for many devices. By looking at it next to other batteries like the ER14250M, you can see the differences in size and power. Understanding the strengths and weaknesses will help you choose between different types of batteries. Key factors to consider are voltage, capacity, and temperature ranges. This knowledge will help you pick the right battery for your needs. Checking FAQs can also help you learn more. If you want quotes or ads about the ER14250 battery, please ask for more help and information.

Frequently Asked Questions

Can I recharge an ER14250 battery?

An ER14250 battery is a type of lithium battery that cannot be charged again. Charging it can harm the battery and mess up the voltage. This could lead to dangerous situations. The best choice is to replace the battery when it is dead.

What devices are best suited for ER14250 batteries?

The ER14250 battery is good for devices that need reliable power for a long time. It has a strong nominal capacity and a stable operating voltage. This battery is found in many electronic devices, including memory backup systems, real-time clocks, medical devices, utility meters, and various industrial sensors.